Din indkøbskurv er tom.
Video
Ingen video tilgængelig
Beskrivelse
Detaljer
** KUN 1 STYK TILBAGE - UDGÅR **
• DMX dæmper 12x2200W m. automatsikringer
• Induktiv og restriktiv belastning
• Display m. mulighed for programmering
• Ingen stik i output (hardwired)
• Minimumsbelastning pr. kanal skal være 60watt
• Mål 19" x 4Unit x 436mm (BxHxD) 31kg
Showtec's flagskib i dæmpere med stort LCD display.
Yderligere informationer i vores katalog
Leverandør beskrivelse:
The DIGIDIM-12 pro is a DMX 512, 12 x 10 Ampere Digital Module Dimmerpack (3 x 32A) which incorporates a 32 bits high power microcomputer with a time processing unit and a big graphic LCD display.
• DMX dæmper 12x2200W m. automatsikringer
• Induktiv og restriktiv belastning
• Display m. mulighed for programmering
• Ingen stik i output (hardwired)
• Minimumsbelastning pr. kanal skal være 60watt
• Mål 19" x 4Unit x 436mm (BxHxD) 31kg
Showtec's flagskib i dæmpere med stort LCD display.
Yderligere informationer i vores katalog
Leverandør beskrivelse:
The DIGIDIM-12 pro is a DMX 512, 12 x 10 Ampere Digital Module Dimmerpack (3 x 32A) which incorporates a 32 bits high power microcomputer with a time processing unit and a big graphic LCD display.
Specifikationer
Detaljer
• Separate DMX addressing for each channel. Each
• channel can be programmed with the DMX address, a
• control curve, output-limit, preheat and the load
• check. Free programming of control curves.
• • 12 internal memories can be recalled
• as required, the memory can be activated
• to fade-in, fade-out or to chase.
• • The chase containing the internal memories
• can be started.
• • The chasing-speed, fadetime and the number
• of steps (1-12) can be programmed.
• • DMX-Off or DMX-Failure can start a chase
• or call a memory.
• • This dimmer can be completely locked while
• the DMX or analog input works normally
• as before.
• • DMX and MIDI input.
• • Master / Slave mode
• • MIDI accepts "program change" signals
• to call the internal memories, chase or "OFF".
• Analog input works without any adjustment
• Short circuit protection for each channel
• with a 16 A circuit breaker.
• • Simple and concise operation due to few,
• clear menus.
• • The LCD shows the input or output signals,
• phase voltage, channel setting, memory, etc.
• • Alarm of over-voltage and over-temperature
• with switch-off.
• • Electronic fuse and load-check
• • Single phase connection: 10A/channel,
• total 96A.
• • 3 phase connection: 10A/channel,
• total 32A per phase.
• Power requirement: AC 230V 50/60 Hz.
• Dimensions: 483 x 436 x 178 mm
• (19"/4U)
• Weight: 31 kg
• channel can be programmed with the DMX address, a
• control curve, output-limit, preheat and the load
• check. Free programming of control curves.
• • 12 internal memories can be recalled
• as required, the memory can be activated
• to fade-in, fade-out or to chase.
• • The chase containing the internal memories
• can be started.
• • The chasing-speed, fadetime and the number
• of steps (1-12) can be programmed.
• • DMX-Off or DMX-Failure can start a chase
• or call a memory.
• • This dimmer can be completely locked while
• the DMX or analog input works normally
• as before.
• • DMX and MIDI input.
• • Master / Slave mode
• • MIDI accepts "program change" signals
• to call the internal memories, chase or "OFF".
• Analog input works without any adjustment
• Short circuit protection for each channel
• with a 16 A circuit breaker.
• • Simple and concise operation due to few,
• clear menus.
• • The LCD shows the input or output signals,
• phase voltage, channel setting, memory, etc.
• • Alarm of over-voltage and over-temperature
• with switch-off.
• • Electronic fuse and load-check
• • Single phase connection: 10A/channel,
• total 96A.
• • 3 phase connection: 10A/channel,
• total 32A per phase.
• Power requirement: AC 230V 50/60 Hz.
• Dimensions: 483 x 436 x 178 mm
• (19"/4U)
• Weight: 31 kg
