Video
Ingen video tilgængelig
Beskrivelse
Detaljer
• Professionel Switch mode forstærker
• 2x2000W/2 ohm, 2x1300W/4 ohm, 2x800W/8 ohm
• Brokoblet 1x4100W/4 ohm, 1x2600W/8 ohm
• Stærkt stål kabinet
• Dobbelt blæserkøling
• Mål: 48 x 50 x 9cm (BxDxH) - Vægt 15 kg
Switch mode strømforsyning sikre en lav vægt trods høj udgangseffekt. Perfekt til mobilbrug.
Bemærk: 2 ohms stabil!
Leverandør beskrivelse:
• Rugged but lightweight steel housing (15Kg)
• Tour proof amplification quality
• 2 Ohm Stable
• Tight and high bass pressure
• Very reliable due to overdimensioned switching
power supply
• Professional switched mode power amplifier.
• Strong, rugged steel housing.
• Clear led indicators for status mode, signal
input, protection, clip, overheat.
• 2x2000W/2 ohm, 2x1300W/4 ohm, 2x800W/8 ohm
• Brokoblet 1x4100W/4 ohm, 1x2600W/8 ohm
• Stærkt stål kabinet
• Dobbelt blæserkøling
• Mål: 48 x 50 x 9cm (BxDxH) - Vægt 15 kg
Switch mode strømforsyning sikre en lav vægt trods høj udgangseffekt. Perfekt til mobilbrug.
Bemærk: 2 ohms stabil!
Leverandør beskrivelse:
• Rugged but lightweight steel housing (15Kg)
• Tour proof amplification quality
• 2 Ohm Stable
• Tight and high bass pressure
• Very reliable due to overdimensioned switching
power supply
• Professional switched mode power amplifier.
• Strong, rugged steel housing.
• Clear led indicators for status mode, signal
input, protection, clip, overheat.
Specifikationer
Detaljer
• Stereo output power 8 Ohm: 800W (1)
• Stereo output power 4 Ohm: 1300W (1)
• Stereo output power 2 Ohm: 2000W (2)
• Bridge output power 8 Ohm: 2600W (1)
• Bridge output power 4 Ohm: 4100W (2)
• Frequency response (8 Ohm): 20 Hz- 20 kHz,
• +/- 0,5 dB
• S/N Ratio: >90 dB
• Input sensitivity: 0,775V/1,0V/1,4 V
• THD+N (8 Ohm,
• 1 kHz)
• ¼ Output power: <0,07%
• Damp. Fact. (8 Ohm, 1 kHz): >200
• Amplifier: 3 steps Class H
• Slewrate: 13V/uSec
• Protection circuit: DC/Short circuit
• /VHF/Temp
• Cooling: Internal heatsink
• with front to rear
• air flow
• Signal input connectors: XLR 3 pin,
• male/female
• Speaker output connectors: Binding post,
• 4 pole speakon
• Dimensions (LxWxH): 483 x 500 x 89 mm
• Weight: 15,0 kg (1)The output power is tested
• conform EIA Standard.(2)The output power is
• tested conform 1 kHz,
• 1 x THD, 40 mSec Burst
• Stereo output power 4 Ohm: 1300W (1)
• Stereo output power 2 Ohm: 2000W (2)
• Bridge output power 8 Ohm: 2600W (1)
• Bridge output power 4 Ohm: 4100W (2)
• Frequency response (8 Ohm): 20 Hz- 20 kHz,
• +/- 0,5 dB
• S/N Ratio: >90 dB
• Input sensitivity: 0,775V/1,0V/1,4 V
• THD+N (8 Ohm,
• 1 kHz)
• ¼ Output power: <0,07%
• Damp. Fact. (8 Ohm, 1 kHz): >200
• Amplifier: 3 steps Class H
• Slewrate: 13V/uSec
• Protection circuit: DC/Short circuit
• /VHF/Temp
• Cooling: Internal heatsink
• with front to rear
• air flow
• Signal input connectors: XLR 3 pin,
• male/female
• Speaker output connectors: Binding post,
• 4 pole speakon
• Dimensions (LxWxH): 483 x 500 x 89 mm
• Weight: 15,0 kg (1)The output power is tested
• conform EIA Standard.(2)The output power is
• tested conform 1 kHz,
• 1 x THD, 40 mSec Burst